Specification |
ASTM A240/A 480 & ASME SA 240/SA 480 (Plate, Sheet, and Strip), ASTM B 409/B906 & ASME SB 409/SB 906 (Plate, Sheet, and Strip), ASME Code Case1325 (All Product Forms), ASME Code Case 2339 (Plate), SAE/AMS 5871(Plate, Sheet, and Strip), BS 3072NA15 (Plate & Sheet), BS 3073NA15 (Strip), VdTÃœV 412 (All Products), ISO 6208 (plate, sheet and strip) |
STANDARD |
ASME, ASTM, AISI, AMS, JIS, EN, DIN, GB/T |
Grade |
UNS N08800, 1.4876, alloy 800, incoloy 800, UNS N08810, alloy 800H,UNS N08811, alloy 800HT |
Thickness of Plate |
4.76MM-70MM and width >250mm |
thickness of sheet |
thickness <4.76MM and width >600mm |
Thickness of Strip |
thickness <4.76MM and width <600mm |
Finish for sheet |
No.1 finish-hot roolled, annealed and descaled |
No.2D finish-cold-rolled, dull finish |
No.2B finish-cold-rolled, bright finish |
No.3 finish-intermediate polished finish, one or both sides |
No.4 finish-general purpose polished finish, one or both sides |
No.6 finish-dull satin finish, tampico brushed, one or both sides |
No.7 finish-high luster finish |
No.8 finish-mirror finish |
Finish for strip |
No.1 finish-cold rolled to specified thick-ness, annealed, and descaled |
No.2 finish-same as No.1 finish, followed by a final light cold-roll pass, general on highly polished rolls |
Bright annealed finish-a bright cold-rolled finish retained by final annealing in a controlled atmosphere furnace |
polished finish-strip is also available in polished finishes such as No.3 and No.4 |
Finsh for plate |
Hot-rolled or cold rolled, and annealed or heat treated, and blast cleaned or pickled |
hot rolled or cold rolled, annealed or heat treated, blast cleaned and /or ground |
hot rolled or cold rolled, annealed or heat treated, blast cleaned and /or ground, and pickled |
Edges for coled rolled strip |
No.1 edge-a rolled edge, either round or square as specified. |
No.3 edge-an edge produced by slitting |
No.5 edge-an approximately square edge produced by rolling or filing after slitting |
Delivery condition |
Annealed, hot rolled, cold rolled, pickled, hard |
Product type |
Plate, sheet, coil, strip, foil, ribbon, wire |
Origin of raw materials |
CHINA, USA, EUROPE, JAPAN |
Brand we mainly distributed |
BAO STEEL, He-cheng nickle |
Value added services available |
Cut-to-length |
Laser cutting |
Third party wittness and test arrangement |
Edge preparation |
Color coding |
Package |
· Wooden Boxes |
· Wooden pallets |
· Steel Strips Bundled |
· Standard seaworthy export packing |
· as required |